WH is Width High - the height just before the windshield turns in
WL is Width Low - the height at the widest part near the bottom
OH is Overall Height - the overall height of the shield
RH is Relative Height - the height of the shield from the top mounting hole up
● Vented for minimum turbulence and back pressure
● Excellent coverage of arms, sides, head
● Shape designed to compliment the lines of the GS
● Made from 4.5mm thick (3/16") DOT certified impact resistant plastic
● Laser cut for precision aerodynamics and fit
● Uses stock BMW mounting hardware: no holes to drill, no modifications of your bike
● Lower wings built in, not added on
● Compatible with BMW hand guards
● Uses stock windshield rake adjustment system
● Includes storage cover, micro-fiber cleaning towel, and mini-spray bottle of windshield cleaner
● Works with the R1100GS if you get Wunderlich Torbinators
● Installation Instructions
● Watch our laser cut a windshield
● All about our windshield designs
● How to choose the right windshield height for you
● Read our FAQ and best in the industry Warranty
● User Review on our R1150GS shields
● Forum Postings on our R1150GS shields
● Excellent coverage of arms, sides, head
● Shape designed to compliment the lines of the GS
● Made from 4.5mm thick (3/16") DOT certified impact resistant plastic
● Laser cut for precision aerodynamics and fit
● Uses stock BMW mounting hardware: no holes to drill, no modifications of your bike
● Lower wings built in, not added on
● Compatible with BMW hand guards
● Uses stock windshield rake adjustment system
● Includes storage cover, micro-fiber cleaning towel, and mini-spray bottle of windshield cleaner
● Works with the R1100GS if you get Wunderlich Torbinators
● Installation Instructions
● Watch our laser cut a windshield
● All about our windshield designs
● How to choose the right windshield height for you
● Read our FAQ and best in the industry Warranty
● User Review on our R1150GS shields
● Forum Postings on our R1150GS shields
Design note on our GS windshields:
BMW has chosen to fold the stock windshield back at the loweroutside corners and attach these corners to the fairing. Most after market windshields for the GS series follow this design. Our experience and opinion is that this results in the outside lower portion of the shield acting like an upside-down wing, pulling air under and around the bottom of the windshield and drawing it into your ribs and up your chest, reducing windshield effectiveness and increasing noise and turbulence at your helmet. Our GS shields do not fold back and form these wings at the lower corners, and therefore do not produce these effects.| Touring Shields for 1999-2005 R1150GS | WH = 14.5" |
WL = 23.5" |
|
|---|---|---|---|
| Size | Price | OH | RH |
| Stock WH = 14, WL = 21 | 15.25" = 38.5cm | ||
|
R1150GS 1999-2005 XLarge | $260 | 24.5" = 62cm | 18" = 46cm |
|
R1150GS 1999-2005 Large | $240 | 23.5" = 59cm | 17" = 43cm |
|
R1150GS 1999-2005 Medium | $240 | 21.5" = 55cm | 15" = 38cm |
| Other Stuff for your Bike | ||
|---|---|---|
● Vented for minimum turbulence and back pressure
● Excellent coverage of arms, sides, head
● Shape designed to compliment the lines of the GS
● Made from 4.5mm thick (3/16") DOT certified impact resistant plastic
● Laser cut for precision aerodynamics and fit
● Uses stock BMW mounting hardware: no holes to drill, no modifications of your bike
● Lower wings built in, not added on
● Compatible with BMW hand guards
● Uses stock windshield rake adjustment system
● Includes storage cover, micro-fiber cleaning towel, and mini-spray bottle of windshield cleaner
● Works with the R1100GS if you get Wunderlich Torbinators
● Installation Instructions
● Watch our laser cut a windshield
● All about our windshield designs
● How to choose the right windshield height for you
● Read our FAQ and best in the industry Warranty
● User Review on our R1150GS shields
● Forum Postings on our R1150GS shields
● Excellent coverage of arms, sides, head
● Shape designed to compliment the lines of the GS
● Made from 4.5mm thick (3/16") DOT certified impact resistant plastic
● Laser cut for precision aerodynamics and fit
● Uses stock BMW mounting hardware: no holes to drill, no modifications of your bike
● Lower wings built in, not added on
● Compatible with BMW hand guards
● Uses stock windshield rake adjustment system
● Includes storage cover, micro-fiber cleaning towel, and mini-spray bottle of windshield cleaner
● Works with the R1100GS if you get Wunderlich Torbinators
● Installation Instructions
● Watch our laser cut a windshield
● All about our windshield designs
● How to choose the right windshield height for you
● Read our FAQ and best in the industry Warranty
● User Review on our R1150GS shields
● Forum Postings on our R1150GS shields
Design note on our GS windshields:
BMW has chosen to fold the stock windshield back at the loweroutside corners and attach these corners to the fairing. Most after market windshields for the GS series follow this design. Our experience and opinion is that this results in the outside lower portion of the shield acting like an upside-down wing, pulling air under and around the bottom of the windshield and drawing it into your ribs and up your chest, reducing windshield effectiveness and increasing noise and turbulence at your helmet. Our GS shields do not fold back and form these wings at the lower corners, and therefore do not produce these effects.
I put the Calsci
screen on my 2004 GS 1150 and the thing is perfect. I put on about 400 miles since installing the
screen. And is very well made it hardly even moves at 100MPH. There is no buffeting at ALL at any speed.
Without ear plugs at 50-60 you can hear engine noise. I'm wearing an Arai Q helmet but always ride with ear
plugs. I was in some pretty strong cross winds and that did not affect the performance of this screen. At
70-80 MPH the wind noise is much better than before. There is also plenty of "free air."
Mounting on an 1150 GSA
Standard GSA Mounting System. You need to remove part #3 from your bike. | 
Standard GS Mounting System You need to purchase these GS parts from BMW:
|